Mechanics of the maxillary central incisor. Influence of the periodontal ligament represented by beam elements

This study aimed to evaluate the influence of loading on a maxillary central incisor with the periodontal ligament (PDL) represented by 2D elastic beam elements using a 2D finite element analysis. Two models (M) were built varying the PDL representation: Mh (homogeneous PDL) and Mht (heterogeneous PDL with beam3 elements). Stress and displacements were determined for three loading conditions (L): Ll, lingual face loading at 45° with the tooth long axis; Li, perpendicular to the incisal edge; and Lip, on the incisal edge, parallel to the tooth long axis. Evaluation was performed on ANSYS software. Lip provided lower stress variation on the tooth and support structures when compared to Ll and Li. PDL's influence on stress values was lower for Lip. Oblique loading showed stress and displacement not observed in parallel loading condition through PDL's heterogeneous representation and it is probably incompatible with the in vivo condition.     

The influence of implant number and abutment design on the biomechanical behaviour of bone for an implant-supported fixed prosthesis: a finite element study in the upper anterior region

It is always recommended to use more implants for supporting a prosthesis in the immediate loading condition than in the classical two-stage treatment procedure. By means of the finite element (FE) method, the influence of the number of implants used in immediately loaded fixed partial prosthesis (FPP) on the load distribution was investigated, considering the abutment geometry. Two 3D FE models were studied employing four implants to support a FPP in the premaxilla. One model was designed with straight abutments and the other with 20°-angled abutments. The results concerning implant displacements, stresses and strains were compared with those of two implant-supported FPPs, obtained in a previous study. A noticeable reduction in the determined biomechanical bone loading was observed with the use of more implants in supporting an immediately loaded prosthesis. This study confirms that the use of additional numbers of implants in an immediately loaded prosthesis is highly recommended.     

Genetic structure of a tribal population, the Yanomama Indians. XIII. Dental microdifferentiation.

Data are presented on the frequency of the following eight dental traits in 635 Yanomama and 65 Makiritare Indians: upper central incisor rotation or winging, shoveling of maxillary incisors, maxillary molar hypocone reduction, Carabelli's trait, mandibular molar cusp number, mandibular molar cusp pattern rotation of second lower premolar, and pattern of second lower premolar cusps. Yanomama dentition is unusual in the high frequency of six cusps on the mandibular molars. There is marked dental microdifferentiation between villages; significant agreement was observed between a matrix of pairwise "dental distances" based on six morphological traits and corresponding matrices based on 11 genetic systems and on geographic location.     

Patterns of variation in Microtus arvalis and Microtus agrestis populations from Middle to Late Pleistocene in southwestern Europe

Fifteen paired fossil populations of Microtus arvalis and Microtus agrestis from southwestern Europe have been analysed from a morphological and morphometric point of view. The sites under consideration are located in the northern Iberian Peninsula and southern France, from the Middle Pleistocene to the end of the Late Pleistocene. The aim of this study is to stress once again the importance of keeping these two species separated in the fossil record in order to recognize specific trends of evolution and divergence and to obtain more precise information on palaeoclimatic and palaeoenvironmental conditions. It was possible to observe remarkable intraspecific differences between Middle and Late Pleistocene populations of both species. Furthermore, in synchronic co-specific populations from the Late Pleistocene, climatic and geographic conditions seem to exert a major influence in shaping intraspecific changes in dental pattern.     

Aggregation of human dental pulp cells into 3D spheroids enhances their migration ability after reseeding

Multicellular three-dimensional (3D) spheroids allow intimate cell–cell communication and cell–extracellular matrix interaction. Thus, 3D cell spheroids better mimic microenvironment in vivo than two-dimensional (2D) monolayer cultures. The purpose of this study was to evaluate the behaviors of human dental pulp cells (DPCs) cultured on chitosan and polyvinyl alcohol (PVA) membranes. The protein expression of hypoxia-inducible factor 1-α (HIF-1α) and vascular endothelial growth factor (VEGF), and the migration ability of the DPCs from 2D versus 3D environments were investigated. The results showed that both chitosan and PVA membranes support DPCs aggregation to form multicellular spheroids. In comparison to 2D cultures on tissue culture polystyrene, DPC spheroids exhibited higher protein expression of HIF-1α and VEGF. The treatment with YC-1 (inhibitor to HIF-1α) blocked the upregulation of VEGF, indicating a downstream event to HIF-1α expression. When DPC spheroids were collected and subjected to the transwell assay, the cells growing outward from 3D spheroids showed greater migration ability than those from 2D cultures. Moreover, DPCs aggregation and spheroid formation on chitosan membrane were abolished by Y-27632 (inhibitor to Rho-associated kinases), whereas the inhibitory effect did not exist on PVA membrane. This suggests that the mechanism regulating DPCs aggregation and spheroid formation on chitosan membrane is involved with the Rho-associated kinase signaling pathway. In summary, the multicellular spheroid structure was beneficial to the protein expression of HIF-1α and VEGF in DPCs and enhanced the migration ability of the cells climbing from spheroids. This study showed a new perspective in exploring novel strategies for DPC-based research and application.     

The external gills of anuran amphibians: Comparative morphology and ultrastructure

The external gills of anuran amphibians are transient structures, covered by the development of the operculum and regressing soon afterwards. Their functional role has been regarded as equivocal. However, detailed morphological analysis has been limited. Analysis of 21 species from six families using scanning and transmission electron microscopy revealed diversity at the anatomical and cellular levels in extent and length of gill filaments, numbers of surface ciliated cells, width of water‐blood barrier distance, and evidence of gill motility. The most highly developed external gills were found in species with delayed hatching, such as Phyllomedusa trinitatis, or in species in which hatchlings hang from the surface film of temporary ponds, such as Phrynohyas venulosa in which gills added 26–38% to body surface area. In one family, the bufonids, all four species examined had poorly developed gills, but in other families where we examined several species, the hylids and leptodactylids, there was considerable diversity of external gills, suggesting flexible adaptation to incubation and hatching environment. J. Morphol., 2008. © 2008 Wiley‐Liss, Inc.     

Jaw mechanism and dental function in the late cretaceous basal eusuchian Iharkutosuchus

Iharkutosuchus makadii is a basal eusuchian crocodylian with multicusped teeth discovered from the Upper Cretaceous of Hungary. Skull and dentition morphology indicates an active food processing for this crocodylian. First among crocodylians, a combination of different analyses, including cranial adductor muscle reconstruction, tooth wear pattern, and enamel microstructure studies, is applied here to support this hypothesis. Data provide unambiguous evidence for significant dental occlusion that was a result of a unique, transverse mandibular movement. Reconstruction of the jaw adductors demonstrates strong muscles responsible for slow but active jaw closure as the motor of transverse jaw movement; nevertheless muscles producing rapid jaw closure were reduced. Macrowear orientations show a dominantly transverse movement of the mandibles completed by a slight anteroposterior component. Along with quadrate morphology, macrowear further indicates that this motion was accomplished by alternate rotation of the mandibles about the quadrate condyles. Dental morphology and wear patterns suggest two types of power stroke: a slicing–crushing stroke associated dominantly with anterior tooth–food–tooth contact (with a low degree of transverse mandibular movement) during in the early stage of mastication, and a grinding stroke with significant posterior tooth–tooth contact and a dynamic transverse movement occurring later. The patterns of microwear show a diverse diet for Iharkutosuchus including both soft and hard items. This is also supported by the microstructure of the thick, wrinkled enamel built up mostly by poorly developed columnar units. Based on wear patterns, ontogenetic variation in feeding habits of Iharkutosuchus is also recognized. J. Morphol., 2009. © 2009 Wiley‐Liss, Inc.     

The impact of fallback foods on wild ring-tailed lemur biology: A comparison of intact and anthropogenically disturbed habitats

Fallback foods are often viewed as central in shaping primate morphology, and influencing adaptive shifts in hominin and other primate evolution. Here we argue that fruit of the tamarind tree (Tamarindus indica) qualifies as a fallback food of ring-tailed lemurs (Lemur catta) at the Beza Mahafaly Special Reserve (BMSR), Madagascar. Contrary to predictions that fallback foods may select for dental and masticatory morphologies adapted to processing these foods, consumption of tamarind fruit by these lemurs leaves a distinct pattern of dental pathology among ring-tailed lemurs at BMSR. Specifically, the physical and mechanical properties of tamarind fruit likely result in a high frequency of severe tooth wear, and subsequent antemortem tooth loss, in this lemur population. This pattern of dental pathology is amplified among lemurs living in disturbed areas at Beza Mahafaly, resulting from a disproportionate emphasis on challenging tamarind fruit, due to few other fruits being available. This is in part caused by a reduction in ground cover and other plants due to livestock grazing. As such, tamarind trees remain one of the few food resources in many areas. Dental pathologies are also associated with the use of a nonendemic leaf resource Argemone mexicana, an important food during the latter part of the dry season when overall food availability is reduced. Such dental pathologies at Beza Mahafaly, resulting from the use or overemphasis of fallback foods for which they are not biologically adapted, indicate that anthropogenic factors must be considered when examining fallback foods. Am J Phys Anthropol 140:671–686, 2009. © 2009 Wiley-Liss, Inc.